Improve and Automate the process of brass case annealing, increase speed and accuracy of case prepping for reloading!
GEN 2 Brass Case Annealer / Annealing Machine - for reloading case prep
- Red Anodized Aluminum Wheels (Standard, Magnum, and Bottom Rotation Wheel)
- Tool-less Adjustment 360 Swivel Torch Holder. The only tool-less torch holder design on the market! Now standard on all Gen 2 units
- ***The holder can double as a torch holder OR a Sharpie holder, to be used as a Brass Marker!
- Sleek, glossy glass digital display for speed Controller.
- Turn knob provides both speed, and simplified rotation wheel speed adjustment.
- Updated chute design. Improved feeding when processing large batches / full chute. No stuck cards like other annealers.
- Turn key solution! No complicated set up required and reasy to go out of box! Well, we lied. Simply attach the torch to the torch holder, and ready to go in 15 seconds! No messing around with finicky set ups like other units out there.
- Powered by 6 independently driven high torque motor. Unlike all other Annealers, it has no plastic parts, and not gear driven. Each motor rated for 30k+ hours. No single point of failure!
- Precision Laser cut steel panels, with a beautiful durable, wear/scratch resistant finish.
- Brass case capacity is approximately 200-300 cases (dependent on caliber)
- Aluminium Standard size wheels will accommodate cases from 300 blkout, 6BR, 223, and up to 30-06.
- Aluminium Magnum wheels will accommodate cases up to 338 Lapua or similar cases.
- Also available by request are SMALL wheel and CheyTac / 50BMG Wheel Kit.
- Short case feed ramp - for annealing short cases such as 6BR/300BO/pistol cases. It’s FREE ! Simply add to your shipping cart and redeem for FREE using coupon code: SHORTY
- No complicated assembly, finicky set up / adjustments needed out of box! Open the box, attach the torch to the ring, and you're ready to go!
Case Prep Center:
- Prep Center is powered by 4 independently operated high torque motorized heads on the top. It will accept any industry standard 8/32 thread attachments for Debur, chamfer, primer pocket reamer, pocket uniformer, flash hole uniformer, etc
- Case Prep Center Attachments are sold separately, if you do not have them already. ***Check out our Burstfire Ultimate Case Prep Tool Kit.
- One of four motors operates at reduced speed, to allow for precision work normally done by hand.
- Prep center can be operated upright, or laid down on the steel handle, to maximize comfort, based on your personal preference.
- On/Off switch independent from Case Annealer.
- Steel handle for easy carrying.